6+1 LED Pixel Ring RGBW Neopixel with Integrated Drivers

We fit seven of our tiny 5050 (5mm x 5mm) smart RGB LEDs onto a beautiful, round PCB with mounting holes and a chainable design to create what we think is our most elegant (and evening-wear appropriate) NeoPixel board yet.

Use only one microcontroller pin to control as many as you can chain together! Each LED is addressable as the driver chip is inside the LED. Each one has ~18mA constant current drive so the color will be very consistent even if the voltage varies, and no external choke resistors are required making the design slim. Power the whole thing with 5VDC and you're ready to rock.

The LEDs are 'chainable' by connecting the output of one Jewel into the input of another. There is a single data line with a very timing-specific protocol. Since the protocol is very sensitive to timing, it requires a real-time microconroller such as an AVR, Arduino, PIC, mbed, etc. It cannot be used with a Linux-based microcomputer or interpreted microcontroller such as the netduino or Basic Stamp. Our wonderfully-written Neopixel library for Arduino supports these pixels! As it requires hand-tuned assembly it is only for AVR cores but others may have ported this chip driver code so please google around. An 8MHz or faster processor is required.

Comes as a single round board with 7 individually addressable RGB LEDs assembled and tested.

MOQ is 500pcs, price is $1.23/pcs.
you can check below link to get more details:
http://www.sfleds.com/products/295.html#.WqEIy_mWbIU

The advantage of SK6812 White Led Vs Normal 5050 White Led

SK6812 white led is color changable white led, Why I call it "color changable white color", because sk6812 white led is unique pixel led. There are 3 CCT (6000-6500k, 3000-3200k, AMBER 1800K) included inside led itself. So SK6812 white smd led can be addressable for different white emitting effect, thus it make up for the lack of white light on the market.

Any of our digital led and digital led strip can meet any customized modes! For example:

◆ Running mode
Green Running, Blue Running, Red Running, Cyan Running, White Running, Purple
Running, Yellow Running

◆ Static mode
Static Green, Static Blue, Static Red, Static Cyan, Static White, Static purple,
 Static Yellow
  
◆ Chasing mode
Green chase to left, Green chase to right, Blue chase to left, Blue chase to
 right, Red chase to left, Red chase to right
Cyan chase to left, Cyan chase to right, White chase to left, White chase to
 right, Purple chase to left, Purple chase to right, 
Yellow chase to left, Yellow chase to right.
  
◆ Gradual change mode
Green Gradual Changing , Blue Gradual Changing , Red Gradual Changing ,
Cyan Gradual Changing , White Gradual Changing,
Purple Gradual Changing , Yellow Gradual Changing.

WiFi Syc control by Alexa Google Home Smart Phone 5050 RGB RGBW strip LED strip light

MINI WiFi RGB Strip light controller Syc control by Alexa Google Home Smart Phone+5050 RGB RGBW strip LED strip light+Power

Shenzhen Shining Future LED Technology Co., Ltd. 5050 RGB Strip+WIFI controller+Power supply full set 

Alexa Support Commands: 

Alexa, turn{light name} on/off
Alexa, set {light name} to 1%-100%
Alexa, dim/brighten {light name}
Alexa, set {light name} to red...
Alexa, change the {light name} to the color blue...
Alexa, set {light name} the to daylight

Google Home Support Commands: 

Say "Ok Google" or "Hey Google", then..
·Turn on <light name>
·Dim <light name>
·Brighten <light name>
·Set <light name> to [50%]
·Dim/Brighten <light name> by [50%]
·Turn <light name> [color]
·Turn on/off all the lights
·Is <light name> on

How to Work with Amzaon Alexa & Google Home:

You can see the details from the Smart Phone App:Magic Home Pro;
The App langue depends on your phone langue;
You can contact us any time;

Feature: 

1. Super bright 5050 SMD LED, high intensity and reliability.
2. Compared to the traditional lighting, the led lighting is lower power consumption, more energy saving and environmental protection.
3. The flexible strip bands can be curved or bent, so you can use them for decoration in many occasions.
4. You can cut the strip every 3 leds along the scissors marks on the strip if you want to do DIY work.
5. Plug and play, easy installation with the adhesive tape on the back to paste.
6. The led strip full kit comes with all black essential parts, black PCB board strip, black remote controller, black IR control box and black adapter. All the elegance black will provide you a new lighting vision that is different from the white ones.

Application: 

It is widely used as decorative lights for holidays and events, i.e exhibitions, weddings, birthday parties, school parties, dancing parties, Christmas, Thanksgiving Day, Saint Valentine Day, Halloween, etc.
It is a good choice to use the lights for hotels, restaurants, night clubs, coffee/ wine bars, shopping malls, cinemas, beauty centers, office fronts, even lights for household kitchens or living rooms, etc.

For more information, please visit our website: http://www.sfleds.com/products/293.html#.WoMZP_mCy00

OR

Video on youtube: https://www.youtube.com/watch?v=xr7SB2xbeoo&feature=youtu.be

8/16/24/35/45leds WS2812B pixel ring Addressable LED modules DC5V SK6812 RGB full color Round LED Circle New

8/16/24/35/45leds WS2812B pixel ring Addressable LED modules DC5V SK6812 RGB full color Round LED Circle New

Input voltage:.............DC5v;
Power .........................5w---16leds/pc, 10w-- 35leds/pc, 13w--45leds/pc
LED resource:.............WS2812B led(5050 SMD RGB LED with built-in improved version of ws2811 ic)
LED: ...............each LED is separately controlled
IC Type: .....................improved version ws2812 IC(built inside the 5050 smd rgb led)
of IC: ..................(1 IC drives 1 led chip);
Pixels:......... 16/35/45
Grey scale: ................256;
Bits/color: ...................8-bits/color;
FPC size: Width:5.2mm
FPC color: ......... BLACK PCB/White PCB
Protection rate...... IP30 Non-Waterproof
Colors: ........................Full color RGB, dream color changing;

WS2812 vs WS2813 Led Strip Newest

WS2813 one pixel damaged will not affect the other Leds working.
Dual signal wires version, signal can jump to transfer.

From: www.sfleds.com

Recommand controllers:
1.T-1000S, T-100K, T-200K, T-300K
2.New Bluetooth SPI Led controller

WS2813 is an intelligent control LED light source that the control circuit and RGB chip are integrated in a package of 5050 components. Its internal include intelligent digital port data latch and signal reshaping amplification drive circuit. Also include a precision internal oscillator and a 12V voltage programmable constant current control part, which achieves highly consistent color effect. The data transfer protocol use single NZR communication mode. After the pixel power-on reset, the DIN port receive data from controller, the first pixel collect initial 24bit data then sent to the internal data latch, the other data which reshaping by the internal signal reshaping amplification circuit sent to the next cascade pixel through the DO port. After transmission for each pixel, the signal to reduce 24bit. Every pixel adopts auto-reshaping transmit technology, making the pixel cascade numbers are not limited to the signal transmission, only relate to the speed of signal transmission. The BIN receives the data signal, and then compare the data with the DIN side after phagocytosis of 24bit data, if DIN do NOT receive the signal, then switching to BIN for receiving the input signal, which ensure that any the IC's damage does not affect the signal cascade transmission and make the BIN in state of receiving signal until restart after power-off. Refresh Frequency updates to 2KHz, Low Frame Frequency and no Flicker appear in HD Video Camera. 250us or more of reset time, it won’t cause wrong reset while interruption, it supports the lower frequency and inexpensive MCU. There’re in a choice of 18mA or 5mA current version, and also in a choice of high brightness or cost-effective version. That is to say, WS2813 is provided with four versions.

From www.sfleds.com

If you want to know more details, you can watch our videos on youtube: https://www.youtube.com/watch?v=xQh6EwYvo2s&feature=youtu.be

UCS1903 LED Strip VS GS1903 LED Strip

UCS1903 LED Strip is a wonderful dream chasing color LED strip light with 133 modes and brilliant color, which would work smoothly and properly. With 1903 IC inside, it can make sure several light strips work synchronously. Long service life, more than 50,000 hours. It is shockproof, waterproof and dust-proof.  It is widely used for home decoration, hotels, clubs, bar, shopping malls, show exhibition, KTV, holiday, event, and it is also applied in backlighting, concealed lighting, channel letter lighting, automobile and bicycle decoration, etc. 


These are high-speed serial super-bright RGB LED Strips! They use excellent, high-speed USC1903 serial controller chips to implement 8-bit RGB control of the LEDs with a clock line, so the entire interface on these strips looks like 12 volts, Ground and Data. It can be 30led per meter or 60led per meter.

PCB Size	10mm
LED Quantity	30pcs/60pcs
Controller	SD Controller
IC	ws2812
Product Keywords	ir remote programmable rgb ws2811 led strip

x

Controller:

Application:

UCS1903 LED Datasheet:
https://drive.google.com/file/d/15yQPMieUFUoezALY7gEHvVfIZT_hsZeQ/view

If you want to know more interesting digital project of UCS1903 Led Strip from our customers, follow our youtube: https://youtu.be/pqQcyeAxnbs

UCS1903 LED VS GS1903 LED:

Application Project of 30MM 12V RGB Full Color WS2811 LED Globe String Lights 5050

This project is from one of our Dutch customers who bought 30mm globe light from us.

Product Description

1. Individually control: 1PCS LED pixel & 1IC (WS2811/UCS1903/SM16703/SH1908)

2. Waterproof: Yes IP68, with silicon glue waterproof protection.

3. Installation: Easy to install, you'd better drill the hole about 30-31mm.

4. Power supply: You must use a 12V DC power supply to power this pixel, do not use higher than 13V

     or you can destroy the entire pixel.

5. Combination: PVC shell(thermostability, cold-resistant, resistant to UV) and PCB board, connector cables.

6. With features of high brightness, low power dissipation, long lifespan, low Voltage, low decline, colorful.

7. Connetors: 3PIN JST female and male connectors, also can be waterproof connectors, 

8. Color and effect: addressable lights you can set to any color, or animate, like running water,chasing

   and scanning etc. depending on the different installation methods may compose different dynamic

   effect of different color's character and design

9. Factory sales directly, good quality and price, offer 2 years warranty and quikly after-sale service.

Product Features

Led Type	Size	Voltage	Power	Wire Length	Weight(each piece)	Price
WS2811(3pcs 5050 rgb)	30mm	DC12V	0.72W	150mm	11g	$0.276/pcs

Product Name	30mm 3LEDs/pcs led pixels
Product No.	sfleds-D30B-12V
LED Chip	Epistar SMD 5050 RGB LED chip
IC Chip	WS2811/UCS1903/SM16703/SH1908
Input Voltage	DC12V
Watts	0.72W/PCS
Cover Color	clear lens cover
Connectors	3PIN JST, also can be waterproof connectors
Beam angle	140
Certification	CE, RoHS
LED Qty	3LEDs/pcs
Cable Length	12cm usually, also can be customized

To see more details:

http://www.sfleds.com/products/290.html#.WmlEfvmCzIU